[备份]angstrom rootfs for at91

OpenEmbedded / Angstrom : build from sources How to build Angstrom for AT91 Pre-requires Building environment Getting BitBake Getting OpenEmbedded AT91 OpenEmbedded overlay tree Setup local configuration Start building Tips & tricks OE Link collection BitBake Hello World examples How to build Angstrom for AT91 Note that building an entire distribution is a long process. It also requires a big amount of free disk space ; at least : ~650 MByte of source archives downloaded for Internet ~5 GByte of compiled packages and tools This documentation is largely inspired by the following resources : Angstrom simple build instruction: http://www.angstrom-distribution.org/building-angstrom OpenEmbedded getting started instructions: http://wiki.openembedded.org/index.php/Getting_Started To build the binary found in the OpenEmbeddedAngstromGet page, you will have to go through the following steps. Pre-requires Here are the reference pages for setting up an OpenEmbedded building environment. http://wiki.openembedded.net/index.php/Required_Software http://wiki.openembedded.net/index.php/OEandYourDistro Note however that most of time, on a development host, those packages are often already installed. Building environment A step-by-step comprehensive installation is explained in the OpenEmbedded Getting Started page. The following lines have to be considered as an add-on that is AT91 specific or that can facilitate your setup. Have a look at the OEDirectoryTree to figure out what your working environment tree will look like. In the following procedure, each time we speak about the base directory, we refer to the stuff directory. Getting BitBake Take it through the BitBake build tool website and take the latest archive tarball. follow the advice: simply install it in your OEDirectoryTree and make a generic link: tar xvzf bitbake-1.8.18.tar.gz ln -s bitbake-1.8.18 bitbake Getting OpenEmbedded Once in your OEDirectoryTree, download a snapshot of the OpenEmbedded database using the GIT Souce Code Management tool. git clone git://git.openembedded.org/openembedded openembedded or using HTTP protocol: git clone http://repo.or.cz/r/openembedded.git openembedded  Make sure to call the directory where you will clone the GIT source openembedded. This name will be used in the following procedure and in the site.conf configuration file. Then create a local branch based on OpenEmbedded stable/2009 branch: cd openembedded git checkout -b stable_2009_mybranch origin/stable/2009 cd .. For demo root filesystems available in the GettingStarted page, we used the following commit ID :a646269c2ada7691d8a7f7455ba4528c7cca3483 . The stable/2009 branch should be stable enough to be able to build using those instructions even with a more recent HEAD for this branch. AT91 OpenEmbedded overlay tree In addition to the upstream recipes, we also have a set of our own recipes or modifications of the original ones. So, the following overlay tree will modify current OE original recipes.  note however that the goal of those recipes is to merge the most of it bits into the mainstream OE tree. DESCRIPTION SOURCES PATCH OpenEmbedded database Web interface: http://cgit.openembedded.org/  branch: stable/2009 overlay directory tree archive Then download and install the overlay tree archive, be sure to be in your OEDirectoryTree and: wget ftp://ftp.linux4sam.org/pub/oe/linux4sam_x.y/oe_at91sam.tgz tar xvzf oe_at91sam.tgz This archive contains the configuration files, recipes that will overload the original ones from the OpenEmbedded project. The oe_env.sh script will allow you to setup local configuration variables needed for your rootfs to build. Setup local configuration The local configuration is located in oe_at91sam/conf/local.conf . This configuration file will overload theopenembedded/conf/local.conf one.  Read comments in it as it will bring you valuable information and allow you to adapt it to your own environment and building host (directory structure for example). Choose the proper machine type: we will use at91sam9m10g45ek for this setup: MACHINE ?= "at91sam9m10g45ek" Start building Be sure to always be in your OEDirectoryTree. To start the building, source the oe_env.sh script: source ./oe_env.sh Then begin building the distribution with a little set of packages: bitbake base-image  even a minimal image will require a big amount of time because of the cross-toolchain building process. The console and graphical images are built using the following recipes respectively: bitbake console-at91sam9-image bitbake x11-at91sam9-image Or for AT91SAM9M10 based boards: bitbake x11-at91sam9m10-image This will allow you to take advantage of video features of this chip. This image will include kernel and Gstreamer components needed to use the hardware video decoder. Tips & tricks OE Link collection From the BUG community, here is a very good link collection : Three Steps for OpenEmbedded N00Bs Wonder how to customize an OpenEmbedded building based on AT91 SOCs? Here is a simple and clear step by step blog: Customizing OpenEmbedded BitBake BitBake usage: http://www.uv-ac.de/openembedded/openembedded-3.html#ss3.2  BitBake User Manual list tasks provided by a package: bitbake -c listtasks <package_name> You can use one of those tasks to have a fine grained control over the package building. The structure of a BitBake file explained: BitBake Metadata Hello World examples Very well explained Hello world example although directory structure differs Basic example in OE official manual The OpenMoko way:  http://wiki.openmoko.org/wiki/Building_a_hello_world_application  http://wiki.openmoko.org/wiki/Application_Development_Crash_Course#Your_First_Application

ATTACHMENT ACTION SIZE DATE WHO COMMENT oe_angstrom_at91-2.diff.gz props, move 194.9 K 12 Dec 2008 - 12:56 NicolasFerre linux4sam_1.4_20081212 oe_angstrom_at91-3.diff.gz props, move 195.9 K 23 Jul 2009 - 15:17 NicolasFerre linux4sam_1.6_20090723 oe_angstrom_at91.diff.gz props, move 192.5 K 15 Apr 2008 - 13:13 NicolasFerre linux4sam_1.2_20080415 r28 - 07 Jun 2010 - 14:23:07 - NicolasFerre